







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Kitchen Remodeling: The Garden Grove Owner’s Guide
We install Unilock-compatible kitchen remodeling in Garden Grove, and a full kitchen typically runs $14,000 – $45,000 installed, with small kitchens from $9,000 – $20,000. Most owners don’t decide to remodel on a whim. They call after something fails: a cabinet box swells and separates from the wall, a countertop edge chips at the seam, a drawer glide grinds every time it opens. We’re an independent service provider, not affiliated with Unilock, so when we quote a replacement we name the part, the price, and the install window in writing. Under Clause 1 of The Haven Standard, that written price comes before anyone starts.
Which Unilock Models This Applies To

Unilock’s kitchen lines vary by series, and the part that fits one won’t always fit another. Cabinet boxes in the Broadoak and Ridgewood series use a different side-panel thickness than the Crestline series, which changes the hinge plate and the drawer glide tolerance. Before we quote, we identify the model three ways: the label inside the cabinet door, the measurement of the box depth (12-inch versus 24-inch is a common gotcha), and the hardware stamp on the hinge or glide. Bring a photo of all three. If the label is gone, we measure the door gap and the box depth and match it against the series spec.
OEM versus aftermarket is a real decision for Unilock. OEM parts match the original color, sheen, and hardware pattern exactly, but a single OEM cabinet door can run $180 – $420 and ship in two to four weeks. A quality aftermarket equivalent, matched by finish and dimension, often lands under $120 and installs the same day. We quote both side by side so you can decide with the numbers in front of you. For adjacent finishes, we also source KraftMaid, Cambria, and Silestone when a Unilock part is discontinued.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Kitchen Remodeling Is Failing
- Cabinet box delamination. The side panel separates from the back panel at the seam. In Garden Grove’s inland humidity, this usually starts where a sink or dishwasher leaks small amounts of moisture over years, swelling the particleboard core until the seam pops.
- Drawer glide failure. The glide grinds, catches, or lets the drawer sag at the front. The glide’s plastic roller wears flat after roughly 8 – 12 years of daily use, and the drawer face then drags on the frame.
- Countertop edge chipping. A chip at the seam or front edge means the substrate under the counter has flexed. Unilock quartz-look tops are brittle at the edge, and a seam that isn’t fully supported will chip within a season.
- Cabinet door hinge sag. The door hangs low on one corner and won’t stay closed. The hinge plate screws have pulled out of the box because the panel thickness doesn’t match the plate, a common mismatch after an earlier repair.
- Backsplash separation. The caulk line pulls away from the wall or counter. In Garden Grove, this shows up most often on the south and west walls where afternoon heat expands the cabinet frame against the tile.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Garden Grove, a cabinet installation runs $4,000 – $13,000, a countertop installation $2,000 – $6,500, a backsplash $800 – $2,500, and a kitchen island $3,000 – $10,000. A small kitchen remodel starts at $9,000 – $20,000, and a full kitchen remodel lands between $14,000 and $45,000. The range is driven by three things: how much of the existing layout stays, whether the counter is a full slab or a remnant, and how many cabinet doors and drawers need replacing versus the whole run.
Every quote separates the part cost from the labor cost so you can see what the Unilock part actually costs. The price is flat, the scope is written, and the warranty is written too. Nothing changes unless you sign a change order first. That’s the discipline that keeps most projects within a few percent of the agreed number.
DIY or Call Us?
You can safely check a few things yourself: open every cabinet and look for swelling, take photos of the model label and the hardware stamp, measure the box depth, and test whether a drawer sags by pulling it fully out. That’s information, not repair.
Where DIY goes wrong is at the substrate and the counter seam. A cabinet box that looks like a simple door swap is often a rotted core once the door comes off, and a countertop edge chip repaired with filler will re-chip within a season because the substrate is still flexing. We also flag the electrical and plumbing behind a cabinet as a safety call: if the failure is at a sink supply line or a dishwasher connection, shut the water off and let a trained professional handle it. Call (888) 303-8980 and we’ll walk you through what’s safe to check before you touch anything.
FAQs

How long does Unilock kitchen cabinetry last in Garden Grove? Most Unilock kitchen cabinet runs hold up 15 – 20 years in Garden Grove’s climate, provided the sink and dishwasher area stays dry. The real failure clock is moisture: inland humidity plus a slow leak will shorten that to 8 – 12 years in the cabinet next to the sink. Call (888) 303-8980 for an exact quote – estimates are free.
Can a failing Unilock part be repaired instead of replaced? Sometimes yes. A drawer glide, hinge, or single door can usually be swapped without touching the rest of the run. A delaminated box or a chipped counter seam usually can’t be repaired reliably, because the substrate underneath is the real problem. We’ll tell you which one you’re looking at before you commit.
How long does the swap take? A hinge or glide swap takes under an hour. A single cabinet door or drawer face is typically same-day. A full cabinet run or countertop replacement runs two to five days because the counter has to template, fabricate, and cure. We give you the days in the written scope, not a ballpark.
How do you source the part? We match your Unilock model by label, box depth, and hardware stamp, then quote the OEM part and a quality aftermarket equivalent side by side. If the series is discontinued, we source through the vetted brand network we already buy from, including KraftMaid, Cambria, and Silestone. No part sits on a truck; every part is ordered to your model. Call (888) 303-8980 for a written quote.
Call Rowan Construction Group Garden Grove at (888) 303-8980 to schedule your free estimate. We’ll bring the written price, the part options, and the scope before anyone picks up a tool, and a live person answers the phone 24/7. If you already have a competitor’s quote, bring it: our Free Second Opinion reviews it line by line at no charge.
Written by the team at Rowan Construction Group Garden Grove, serving Garden Grove and nearby areas.












