







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Garden Grove Homeowners Choose Unilock Construction
We provide independent Unilock construction service in Garden Grove, connecting homeowners with local crews who install and repair Unilock paver and retaining-wall systems to the manufacturer’s base, edge-restraint and polymeric-sand specs. What sets that work apart is the details general hardscape outfits skip: a compacted, graded aggregate base, edge restraint pinned into concrete, and joints filled and sealed correctly. Unilock systems fail for predictable reasons, and our network is vetted on whether they get those reasons right.
Garden Grove’s compact mid-century lots make this matter. Rear yards here are often built right to the property line, so a paver patio, driveway re-lay or retaining wall has to fit within tight tolerances – and a base that drains poorly shows up fast. We work across the Brussels Block, Cambridge Pavingstones, Beacon Hill and U-Cara families, and we’re clear about our role: Rowan Construction Group Garden Grove is an independent lead-generation service. We are not an authorized Unilock dealer or installer, and we’re not affiliated with or endorsed by Unilock. Call (888) 303-8980 for a free estimate.
Why Trust Rowan Construction Group Garden Grove for Your Unilock Construction?

Our technicians have up to 19 years of experience, and the ones who handle Unilock work know the product families by name and by behavior. They can tell you why a Brussels Block driveway in Garden Grove loses its polymeric sand at the apron while a Cambridge paver field two blocks over stays tight – usually an edge-restraint issue, not a sand issue. That kind of diagnosis comes from years on the same systems, not from reading a spec sheet.
We work with genuine Unilock pavers, wall units and matching edge restraint for replacements, so color and dimension match the existing field rather than sitting a shade off. On warranty-safe practice, our approach is straightforward: we match the original system’s components, keep base and joint materials within Unilock’s recommended specs, and document what was found and what was done with a photo record on every visit. That record matters if a homeowner ever needs to show a manufacturer what happened.
Every quote is a flat written price with a written scope before work begins, under Clause 1 of The Haven Standard. No change proceeds without a signed change order. If a crew finds a failed base under a sound-looking field, that becomes a written change order, not a surprise line item. And if you have a competitor’s written estimate for your Unilock work, our Free Second Opinion will review it line by line at no charge.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Unilock Construction Problems We Fix in Garden Grove
These are the failures we see most on Unilock systems around Garden Grove, and the real cause behind each.
- Efflorescence and salt bloom on Brussels Block and Cambridge pavers. That white haze isn’t dirt. It’s mineral salt drawn to the surface through moisture, and it shows up when the base doesn’t drain and the pavers were sealed too early or not at all. Garden Grove’s salt-laden marine air and long dry-then-wet cycles push it. The fix is drainage and surface prep first, sealer second.
- Polymeric sand washout and joint erosion at driveway aprons. In a Cambridge or Brussels Block driveway, sand that keeps washing out of the same joints usually means the edge restraint wasn’t set into concrete. Without that pinned restraint, the field spreads under traffic and the joints open. Re-sanding alone won’t hold.
- Settling and lippage. Pavers that rock or step at the edges sit over an under-compacted or too-thin aggregate base. Unilock specs a compacted, graded base, and Garden Grove’s older soils and clay pockets punish crews who skip compaction. This is the defect that leads to full replacement if it’s left too long.
- U-Cara retaining wall bulging or leaning. U-Cara Multi-Face walls that lean usually went up without geogrid and proper drainage behind the units. The wall units themselves are fine; the earth behind them is the problem. A wall that bulges needs to come down to the failed course and be rebuilt with reinforcement.
- Beacon Hill patio joints opening after Santa Ana wind seasons. Flagstone-texture patios with shallow compacted bases can shift when wind-driven debris and soil movement work the joints. Real fix: re-grade, re-compact and re-sand with polymeric sand, sealing only once the surface is dry and bloom-free.
A Brussels Block or Cambridge paver driveway typically shows its first problems as wandering joints, loose polymeric sand and pavers rocking at the apron. Usually that’s the base or the edge restraint, not the paver. A qualified hardscape pro pulls the affected field, re-grades and re-compacts the base to spec, resets the edge restraint into concrete, re-lays the pavers and re-sands with polymeric sand, sealing only after the surface is dry and bloom-free.
Unilock Parts & Our Repair-vs-Replace Approach

For replacements, we source genuine Unilock pavers, wall units and matching edge restraint so color and dimension line up with the existing field. Polymeric sand and base aggregate are commodity items, and quality aftermarket brands are fine there – the provenance that matters is the paver and the edge restraint, not the sand. We don’t claim to stock Unilock locally; parts are ordered to the job based on what the diagnosis finds.
Repair versus replace comes down to the base. On a sound, properly compacted base, a re-lay, re-sand and re-set edge restraint is almost always the right call and far less expensive than tearing out a good field. Full replacement only makes sense when the base itself has failed, or when lippage and settlement have spread across enough of the driveway that patching won’t hold. We’ll tell you which one you’re looking at, in plain terms, before any work is quoted.
Call (888) 303-8980 for a free estimate and a straight answer on repair versus replacement.
Our Unilock Service Process – Step by Step
- 1
Diagnosis. We inspect the field, pull a paver or two where needed, check base compaction and depth, and look at how the edge restraint is set. The written findings describe the condition in plain terms: base depth, compaction, joint condition, drainage.
- 2
Written scope and flat price. You get a flat written price with a written scope before work starts. If the diagnosis turns up a failed base that needs a change, that’s a signed change order before any additional work proceeds.
- 3
Repair or install. Re-grade and re-compact the base to Unilock spec, reset edge restraint into concrete, re-lay genuine Unilock pavers or wall units, and re-sand with polymeric sand. For new installs, the same sequence runs from excavation through final compaction.
- 4
Verify and document. We check joint fill, edge hold and drainage, then seal only once the surface is dry and bloom-free. You receive a documented photo record of what was found and what was done on every visit.
- 5
Warranty. The 365-Day Done Right Promise backs the work: if it isn’t done right, we make it right. The written warranty goes with your paperwork.
See the difference
Before
After
Before
After
Before
AfterUnilock Products We Service & Install in Garden Grove
We handle the Unilock families most common on Garden Grove properties: Brussels Block for tumbled, dimensional driveways and patios; Cambridge Pavingstones for the cobblestone-look driveways that dominate the older tract streets; Beacon Hill for flagstone-texture patios; and the U-Cara and U-Cara Multi-Face retaining wall system for grade changes and yard walls. Our sub-services on this page center on Paver Driveway Installation, Paver Patio Installation and Driveway Replacement. Every job is quoted with a flat written price and written scope before work begins.
We Also Service These Brands
Unilock is one of more than fifty vetted material brands we work with, so we’re not single-brand dependent. Alongside Unilock hardscape, our crews service KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures across kitchen, bath and exterior projects. That sourcing depth keeps written quotes honest – real numbers rather than inflated ones – and gives you one contractor relationship instead of four.
FAQs – Unilock Construction Service in Garden Grove

No. We are an independent lead-generation service connecting homeowners with local Unilock-experienced professionals, and we are not an authorized Unilock dealer or installer, nor affiliated with or endorsed by Unilock. Our value is matching you with crews vetted on Unilock base, edge-restraint and polymeric-sand practice. Call (888) 303-8980 to talk through your project.
Yes, for pavers, wall units and matching edge restraint, we use genuine Unilock components so color and dimension match the existing field. Polymeric sand and base aggregate are commodity items where quality aftermarket brands are fine. We don’t claim to stock Unilock locally; parts are ordered to the job after diagnosis. Call (888) 303-8980 for a free estimate.
Most repairs – a re-lay, re-sand and edge re-set – run a day or two once parts are on hand; a full paver driveway installation runs several days depending on square footage and base work. Your written scope includes a timeline before work starts. Call (888) 303-8980 and we’ll give you a realistic window for your job.
We cover Brussels Block, Cambridge Pavingstones, Beacon Hill and the U-Cara / U-Cara Multi-Face retaining wall system – the families most common on Garden Grove properties. If you’re unsure which you have, describe the paver shape or send a photo. Call (888) 303-8980 for a free estimate.
Not when the work matches the original system and stays within Unilock’s recommended base and joint specs, which is how we approach it. We keep a documented photo record on every visit so there’s a record if a manufacturer ever asks. Call (888) 303-8980 with questions about your coverage.
Unilock paver work in Garden Grove runs in these ranges, quoted as a flat written price with written scope before work begins:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
Call (888) 303-8980 for an exact quote – estimates are free, and no work proceeds on a change without a signed change order.
Book Your Unilock Service in Garden Grove, CA
If you’re ready to fix a failing Unilock field or install a new one in Garden Grove, call (888) 303-8980 for a free estimate. You’ll get a flat written price, a written scope, a photo record and the 365-Day Done Right Promise. A live person answers calls 24/7. Bring a competitor’s estimate and we’ll review it line by line at no charge.
Written by the team at Rowan Construction Group Garden Grove.












