







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Irvine, CA
We provide independent Unilock paver and hardscape service across Irvine, from Beacon Hill Flagstone patios in Woodbridge to Umbriano driveways in Northwood. What sets our work apart here is the approval layer: in Irvine, a Unilock job clears City of Irvine permits and the village HOA’s architectural review before a single base is excavated, and we plan around both. Call (888) 303-8980 to schedule a free estimate.
Why Irvine Residents Choose Us for Unilock Service

Irvine homeowners searching for Unilock service usually have one of two situations on their hands: a paver field that’s faded or shifted, or a driveway and patio plan that needs to pass design review before work can start. We work with Unilock’s hardscape catalog every week, which means we know the practical differences between Brussels Block and Umbriano under California sun, which edge restraints hold their line on Irvine’s clay and decomposed granite soils, and how polymeric jointing sand performs through Santa Ana wind events and the rare heavy winter storms.
We’re not authorized, sponsored or endorsed by Unilock. We’re an independent contractor that specifies and installs their systems to manufacturer standards, and we say so plainly. That matters in Irvine because it means we can match existing pavers for a repair, tell you when a patch is the honest answer and a full replacement isn’t, and navigate the layered city-plus-HOA approval process without a corporate filter in between. Our technicians have up to 19 years of experience, and every visit includes a documented photo record as a standard deliverable.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Unilock Construction Problems We Solve in Irvine
- Chalky white haze and color fade. Efflorescence on Umbriano and Brussels Block surfaces is mineral salt wicking to the top. Irvine’s low rainfall means those salts don’t get rinsed off the way they would in wetter climates, so the haze lingers for years instead of clearing on its own.
- Polymeric sand washing out. Joint sand fails when runoff scours it away. In HOA villages with undersized drainage, the rare but intense winter storm pushes water across the paver field and strips joints in a single event. Santa Ana winds then blow grit and debris into the open gaps and start pavers rocking.
- Paver settling and lippage. When a field was set over shallow base on Irvine’s expansive clay and decomposed granite soils, the ground moves with seasonal moisture and pavers settle unevenly. You’ll notice trip edges at walkways first, then the whole field going out of plane.
- Edge restraint and base failure. A paver field is only as good as its border. Where the edge restraint wasn’t set deep enough or the base wasn’t compacted in lifts, the perimeter creeps outward on slopes like those found on many Irvine driveways and aprons.
- Chipping and spalling on Beacon Hill Flagstone. Flagstone edges chip at driveway aprons and vehicle load points where the base wasn’t compacted properly. Irvine’s hot pavement surfaces accelerate that wear on the vehicle side of the field.
Unilock Service in Irvine: What Local Conditions Mean for Your Equipment
Here’s the thing that shapes almost every Unilock job in Irvine: because the city was largely built out by the Irvine Company between the 1970s and 2000s, nearly all hardscape work happens inside HOA-governed villages with architectural review layered on top of City of Irvine permitting. A Unilock paver driveway or patio often stalls at design review over paver color, pattern and border detail before a single base is excavated. The approval packet, not the crew, sets the schedule. We plan for it up front, confirm the replacement color and pattern against the village’s approved palette, and keep the install calendar honest about what the review timeline actually looks like. That means in villages like Woodbridge and Northwood, we’re building the submittal and the construction plan side by side, not treating the HOA as an afterthought.
Unilock Models & Products We Service in Irvine
We work across the lines Irvine homeowners actually have on their properties: Unilock Brussels Block pavers, Unilock Beacon Hill Flagstone, Unilock Umbriano, and Unilock Copthorne wall units. For repairs and expansions, we specify genuine Unilock pavers, genuine Unilock edge restraints, and compatible polymeric jointing sand so color, dimension and finish stay consistent across the field. Parts are sourced per job against the specific Unilock series and run, since color batches vary between production runs. We don’t claim local stock; we confirm the correct match before ordering. Where a section is structurally sound, we repair and re-sand rather than replace whole fields, and we’ll tell you when an aged paver field is honestly better replaced than patched.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Irvine

Written pricing before any work starts is the standing rule here, under Clause 1 of The Haven Standard. Every quote is a flat price with a written scope and a written warranty. Here’s what Irvine jobs typically run:
| Service | Price range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
Cost is driven by field size, base depth required for Irvine’s soils, edge restraint vs. wall units, pattern complexity, and the HOA submittal timeline if redesign is required. A free estimate includes a site assessment, the base condition, a written scope, and the price. Call (888) 303-8980 for an exact quote – estimates are free.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Irvine
Does my Irvine HOA have to approve the Unilock paver color and pattern before installation? Yes. Nearly every Irvine village has architectural review that runs on top of City of Irvine permitting, and color and pattern are part of the submittal. We confirm the approved palette before ordering, which is often the step that dictates the schedule.
Which Unilock paver line holds up best to Irvine’s sun and Santa Ana winds? Umbriano and Brussels Block are the lines we specify most often here, and Umbriano tends to hold color through high-UV exposure better than lighter-toned traditional pavers. Proper polymeric jointing and a compacted base matter more than the specific line for wind resilience. Call (888) 303-8980 to talk through your specific field.
Why do my Unilock pavers look chalky and faded? Efflorescence is mineral salt wicking to the surface, and Irvine’s low rainfall means it doesn’t get rinsed away. It’s not a defect and it’s treatable, but on aged fields the real question is whether joints and base still hold. Call (888) 303-8980 for a free estimate on cleaning and re-sanding.
Can you repair a section of Unilock driveway instead of replacing the whole thing? Often, yes. If the base under the failed section is sound, we pull the affected pavers, reset to the original pattern, replace the joint sand, and match the color against the run. When the base itself has failed across the field, a section repair won’t hold. Call (888) 303-8980 and we’ll tell you which one you’re looking at.
How does Irvine’s soil affect a Unilock paver installation? Irvine sits on expansive clay and decomposed granite, which moves with seasonal moisture. Base has to be compacted in lifts and set deep enough to stabilize below the active layer, or the field settles and lippage follows. Proper base prep is the biggest single cost driver here. Call (888) 303-8980 for an exact quote – estimates are free.
Service Areas Near Irvine
We also serve homeowners in Irvine service area villages and the surrounding area, including Garden Grove, Fountain Valley, Tustin, Santa Ana, and Costa Mesa. Same local HOA and soil conditions apply across much of this corridor.
Book Your Unilock Service in Irvine Today
Call (888) 303-8980 for a free estimate on Unilock paver installation, repair or driveway replacement in Irvine. Every quote is written, flat, and delivered before any work starts – and every visit includes a documented photo record of what we found and what we did. Bring a competitor’s estimate and we’ll review it line by line at no charge.
Written by the team at Rowan Construction Group.












