







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Fence Installation: The Garden Grove Owner’s Guide
Tamko fence installation in Garden Grove typically runs $3,500 to $9,000 installed, depending on linear footage, gate count and whether we’re setting new posts or working around existing hardscape. That’s a written flat price before any work starts, under Clause 1 of the Haven Standard. Most owners don’t start out shopping for a fence, though. They start with a leaning post after a Santa Ana wind event, a gate that drags on the concrete, or a run of composite boards that has gone chalky and gray within four or five summers.
We’re an independent service provider. Rowan Construction Group Garden Grove isn’t affiliated with Tamko, and we don’t represent their warranty. What we do is install Tamko-compatible fence systems to their published specs, and put the price in writing first.
Which Tamko Models This Applies To

Tamko’s residential fence lineup has changed names more than once, and that’s where most Garden Grove homeowners get stuck. The EverGrain composite line and its earlier branding share the same basic board profiles, but the rail-and-picket dimensions shifted slightly across production years. If you’re matching new boards to an existing run, measure before you order: board thickness, picket width and the distance between post centers. A board that looks identical online can be an eighth of an inch off, and that’s enough to throw your rail spacing.
Finding the model: check the inside face of a rail or the back of a picket for an ink-stamped or embossed code, usually a letter-number sequence near the board end. If the stamp has weathered off, a photo of the profile next to a tape measure is enough for us to match it.
OEM versus aftermarket for Tamko specifically: for a full replacement we recommend staying with the Tamko profile so the run reads as one system and the expansion gaps stay consistent through a Garden Grove summer. For a repair of one or two boards, a matched aftermarket composite in the same thickness is a reasonable call and typically saves a few hundred dollars. We’ll tell you which side of that line your job falls on before you commit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Fence Installation Is Failing
Composite doesn’t rot, which is why owners are surprised when a Tamko run starts to fail. The material isn’t the problem in most cases; the installation and the soil under it are.
- Posts leaning after a wind event. In Garden Grove the Santa Ana winds come through dry and fast, and a post set in shallow concrete or in the clay-heavy soil common to the older tracts near Chapman Avenue will rock before the board ever fails. Once a post moves, every rail attached to it moves with it.
- Boards fading or chalking unevenly. Composite holds color for roughly 10 to 15 years in full Orange County sun, but UV exposure across a run is not even. A fence with a shaded north side and a bare south face will look mismatched by year six, and that’s a material reality, not a defect.
- Gates dragging or sagging at the latch. A gate is the highest-stress point on any fence. Composite gates need a heavier frame and a proper diagonal brace, and a sagging gate almost always means the hardware or the frame was undersized for the span.
- Loose rails and wobbly panels. Fasteners backing out of composite is common when the installer didn’t pre-drill. Composite is dense; driving a screw without a pilot hole leaves a hairline crack that opens over a couple of winters.
- Heaving along the base. Boards sitting directly on soil without a clearance gap will buckle as the ground swells and dries through the season. You’ll see the bottom rail lift or the panel bow outward at the base.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a Tamko-compatible composite fence replacement in Garden Grove, budget $3,500 to $9,000 installed. The range comes down to three things: linear footage, gate count and whether posts are set new or reused.
- Standard residential run, 100 to 150 linear feet, single gate: $3,500 to $5,500
- Larger run with two or more gates or a corner return: $5,500 to $9,000
- Post replacement only, per post including concrete: typically $150 to $350
- Single gate rebuild with new frame and hardware: typically $350 to $700
The price covers materials at the specified profile, demolition and haul-away, post setting in concrete, and cleanup. We give you the flat number in writing before anyone picks up a tool, and no change moves forward until a change order is signed. Workmanship is covered under the 365-Day Done Right Promise. You get a documented photo record of the posts, footings and finished run on every visit; that’s standard, not an add-on.
DIY or Call Us?
Some checks are safe and worth doing yourself. Walk the run and push on each post; a post that moves at the top is a footing problem and no amount of tightening will fix it. Check gate hardware and the latch alignment. Photograph the model stamp on a rail. Measure your post spacing and linear footage. That information makes the estimate faster and more accurate.
Where DIY goes sideways on a Tamko composite fence: setting posts. Post depth and concrete volume matter in Garden Grove’s soil, and a post that’s an inch shallow will lean within two wind seasons. Composite also needs pilot holes and consistent expansion gaps; skip either and the boards crack or buckle. And if you’re pulling out existing footings, a buried utility line is a real hazard in the older neighborhoods.
Call (888) 303-8980 for a free estimate. Bring a competitor’s quote and we’ll review it line by line at no charge.
FAQs

How long does a Tamko composite fence last in Garden Grove?
Plan on 20 to 30 years for the boards and 10 to 15 years before the finish looks tired. The real variable is the posts. Composite outlasts the footing in most cases, so a fence installed with properly set, deep concrete posts will still be standing long after the surface color has faded.
Can my failing fence be repaired instead of replaced?
Often, yes. If the posts are sound and the damage is a handful of cracked boards or one dragging gate, a targeted repair runs a few hundred dollars rather than the full $3,500 to $9,000 replacement range. Call (888) 303-8980 and we’ll tell you honestly whether repair is the right call.
How long does the swap take?
A standard Garden Grove residential run is typically two to three days from demolition to cleanup, with post concrete curing overnight in between. Larger runs with multiple gates can stretch to four days. We give you the schedule in writing with the quote.
How do you source the Tamko part?
We match your existing board profile by measurement and model stamp, then source through our vetted brand network at the spec your run needs. If the exact Tamko profile is discontinued, we tell you upfront and quote the closest compatible match with the thickness difference spelled out. Rowan works across fifty-plus vetted brands, including KraftMaid, Cambria and Silestone on the interior side, so the sourcing options are honest rather than narrow.
If your fence is failing and you want a real number before you commit to anything, call Rowan Construction Group Garden Grove at (888) 303-8980 for a free estimate. We’ll walk the run, photograph what we find, and hand you a written flat price with a written scope and a written warranty.
Written by the team at Rowan Construction Group Garden Grove, serving Garden Grove and nearby areas.












