







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The Garden Grove Owner’s Guide
Replacing failed Boral roof tiles or underlayment in Garden Grove typically runs $400 to $1,800 for a targeted repair and $8,000 to $20,000 for a full roof replacement, depending on the tile profile and how much of the field needs to come up. Boral tiles themselves are built to last decades, so when an owner calls us it’s almost never the tile face that gave out first. It’s the flashing, the underlayment beneath the tile, or the fasteners that failed quietly while the tile above looked fine.
Owners usually find us after a ceiling stain appears in a room below a clean-looking roofline. In Garden Grove’s older ranchos, where Boral Saxony and Villa tile went up in the 1980s and 1990s, we see the same pattern again and again: a hairline crack in a field tile that lets water past the underlayment, or a valley flashing that corroded through long before anyone thought to look. Our technicians have up to 19 years of experience reading that pattern, and we quote every job as a flat written price before anyone touches the roof.
Which Boral Models This Applies To

Boral makes a wide spread of concrete, clay, and slate-profile tile. The lines most common on Garden Grove roofs are Saxony 900, Villa, and the flat-profile Madrid and Capri collections, plus Boral’s clay and slate-family tiles on the larger homes near the westside. The exact model matters because tile profiles are not interchangeable: a Saxony 900 is a large-format interlocking tile with specific dimensional tolerances, and a random “similar” tile from a box store won’t lock into the course above or below it. Mismatched tile is the number one reason a repair leaks again within a season.
To identify your part, look at the tile face for a stamp or ink mark on the underside and measure the installed tile’s width and the depth of its head-lap. If the field tile is discontinued, the honest route is color-matched salvage or a certified Boral replacement line sized to the same course. We source through vetted roofing brands including GAF and Owens Corning for underlayment and flashing, and we won’t substitute a Boral part with a lookalike. We’re an independent service provider, not affiliated with Boral, so we match the spec, not the logo.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Roofing Is Failing
Here’s what we actually find on Garden Grove roofs, and what’s usually behind it:
- Water stains on the ceiling or in the attic sheathing. The tile above looks intact, but the underlayment under it has aged out. In Garden Grove’s dry summer heat followed by winter rain, the felt can crack and lose its seal after about 20 years even when the tile is fine.
- Visible cracks or chips in field tiles. These are often the first sign a foot went through the roof during an HVAC or solar visit. One cracked tile lets water past the underlayment, so the damage is always larger than the visible crack.
- Loose or slipped tiles. A failed fastener or a sheared head-lap lets the tile slide out of course. Left alone, the gap exposes the underlayment straight to sun and rain.
- Rust streaks on flashing or valleys. This is corroded valley metal, not the tile. Once the flashing is compromised, water backs up under the tile field and shows up as a stain far from the leak.
- Granules in the gutter or damp soffit. Granule loss points to weathered tile surfaces, and damp soffit suggests the underlayment is no longer shedding water. Both tell us the roof has been failing slowly for a while.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what roofing work runs in Garden Grove, quoted as a flat written price:
| Job | Installed price range |
|---|---|
| Roof repair (flashing, individual tile, underlayment patch) | $400 – $1,800 |
| Tile roof repair (cracked tile, re-bed, replace underlayment section) | $600 – $2,500 |
| Full roof replacement | $8,000 – $20,000 |
| Metal roof installation | $15,000 – $40,000 |
The range is driven by roof pitch and height, square footage, how many tile courses have to come up to reach the failed underlayment, and whether the flashing is valley metal or step flashing at a wall. Every quote is a flat written price with a written scope and warranty before work starts, and no change proceeds without a signed change order. Our work is covered by the 365-Day Done Right Promise.
DIY or Call Us?
Some checks are safe for an owner: look at the ceiling and attic for stains after a rain, note where water tracks, and photograph any cracked tile from the ground with a zoom lens. Reading the substrate and diagnosing a valley flashing is another matter. Roof work means height, and tile roofs are slippery in a way shingle roofs aren’t; a fall off a two-story Garden Grove roof is a serious injury, and one wrong step can crack a run of good tile and start a new leak. This is not a job we recommend taking on yourself.
If you’ve spotted a stain or a slipped tile, we’ll come look, tell you what’s actually failing, and put the number in writing. Call (888) 303-8980 to schedule your free estimate. Bring a competitor’s quote and we’ll review it line by line at no charge.
FAQs

Boral concrete and clay tile typically lasts 40 to 50 years or more, but the underlayment beneath it often fails in 20 to 25 years, so the tile usually outlives the membrane. That gap is why a roof that looks fine can still leak. Call (888) 303-8980 for an exact quote – estimates are free.
Yes, often. A single cracked tile, a corroded valley flashing, or a failed section of underlayment can be repaired for roughly $400 to $2,500, well under replacement. If the leak is isolated, the math favors repair. Call us and we’ll tell you which side of that line your roof is on.
Most targeted tile and flashing repairs are done in a single day, while a full replacement takes several days depending on roof size and pitch. We give you a specific timeline in the written scope before work begins, and no work proceeds without a signed change order.
We match the tile’s profile, dimensions, and head-lap to your existing roof, and if the line is discontinued we route through color-matched salvage or a certified replacement. We don’t carry parts on a truck or keep a local stock; we source what fits your roof before the crew arrives. Call (888) 303-8980 for a free estimate and a written price.
We also work with KraftMaid, Cambria, and Silestone on the interior side of the same homes we roof. Every visit includes a documented photo record of what we found and what we did, and a live person answers our line around the clock. Reach Rowan Construction Group Garden Grove at (888) 303-8980 for your free estimate.
Written by the team at Rowan Construction Group Garden Grove, serving Garden Grove and nearby areas.












