A Rowan company - serving Garden Grove, CA
A living room with a wall of new windows and a sliding glass door
CGI · Garden Grove

CGI Windows & Doors in Garden Grove, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Garden Grove
A new bay window with a cushioned seat
A new casement window over a kitchen sink
A new stained cedar privacy fence
A new paver patio with a seat wall and fire pit
A remodeled primary bathroom with a soaking tub and walk-in shower
A single-story rear room addition with tall windows and a new patio
A new clay tile roof
A new front yard fence with a matching gate
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Windows & Doors: The Garden Grove Owner’s Guide

We install and service CGI windows and doors throughout Garden Grove, and the typical installed range runs from $4,500 to $15,000 for a window replacement and $8,000 to $25,000 for impact-rated window installation, depending on how many openings and what the wall condition looks like behind the trim. Most owners don’t call us because a window looks bad. They call because a part stopped behaving: a sash that won’t stay up, a lock that won’t throw, glass that has fogged from the inside out, or water showing up on the interior sill after a winter storm. Those are the four failures we see most in Garden Grove, and each one points to a specific CGI component rather than the whole window.

Call (888) 303-8980

Rowan Construction Group Garden Grove is an independent service provider. We’re not affiliated with CGI, and we’re not a dealer for their products. What we are is a contractor that knows how their hardware, glazing, and frame systems come apart and go back together.

Which CGI Models This Applies To

New double-hung windows in a dining room

CGI makes several window and door lines, and the part you need depends on the series, not just the brand. Vinyl single-hung and double-hung units use a different balance system and tilt-latch design than their aluminum and impact-rated lines, and patio doors divide into sliding and hinged families with their own rollers, tracks, and multipoint hardware. Before you order anything, find the manufacturer’s label.

On CGI units, the label usually sits in one of three spots: in the head jamb channel where the sash meets the frame, on the face of the sash itself once you tilt it inward, or on the glass edge spacing the panes apart. Read the label and copy down the model or series code, the glass make-up (tempered, laminated, low-E), and the rough opening dimensions. That last number matters more than you’d think. A tape measure across the visible glass tells you almost nothing; the rough opening is what confirms the unit size.

There’s a compatibility catch worth knowing: glass and hardware that fit one CGI series often won’t cross to another. A balance assembly sized for a 24-inch-wide double-hung will not work in a 30-inch unit from a different line, and lock hardware is series-specific. OEM CGI parts carry the exact spec. Quality aftermarket equivalents (balance assemblies in particular) are often identical in function and cheaper, but you need the right spec sheet to match them. We confirm the series and the rough opening before quoting, so the number you get reflects the part that actually fits.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Windows & Doors Is Failing

Here’s what a failing CGI window or door usually looks like in a Garden Grove home, and what’s behind each symptom:

  • A sash that won’t stay up, or drops on its own. The balance assembly (the spring-and-cord mechanism inside the jamb that counterweights the sash) has lost tension or the cord has frayed. On older units the balance cord snaps and the sash falls shut.
  • The lock won’t throw, or the sash rattles in the frame. The lock hardware has worn, the frame has shifted, or the keepers are out of alignment. A single stuck lock often means the sash is no longer sitting square.
  • Glass fogged or streaked on the inside. The seal between the panes has failed and moisture is trapped in the insulated glass unit. A broken seal means the insulating gas has leaked and the unit is no longer doing its job.
  • A sliding door that drags, jumps, or won’t close flush. The roller wheels have worn flat or the track has accumulated grit and debris over the years. Worn rollers are the usual cause of dragging.
  • Water or drafts at the sill or corners. The weatherstripping, sweep, or corner seal has degraded, often after years of heat cycling and sun exposure. This is the symptom most worth chasing early.

Replacement Cost & What’s Included

Installers setting a new window and checking it for level

A window replacement for a Garden Grove home runs $4,500 to $15,000 installed. Impact-rated window installation, which many owners in this area want for storm protection, runs $8,000 to $25,000. What drives the number: the number of openings, whether you’re swapping the sash and hardware or the whole unit, the glazing (tempered, laminated, or impact-rated), and what the wall and trim look like once the old unit comes out.

Our quotes are flat prices with a written scope before any work starts. That includes parts, labor, disposal, and the written warranty on the work, and no change proceeds without a signed change order. If a repair is the honest answer instead of a replacement, we say so. And if you already have a written estimate from another company, we’ll review it line by line at no charge through our Free Second Opinion offer. Under Clause 1 of The Haven Standard, the price is written down before anyone picks up a tool.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Some of this you can safely check yourself. Open and close the window, tilt the sash and look at the balance cord for fraying, run a hand around the frame to feel for drafts, and look at the glass for fogging between the panes. If the culprit is weatherstripping, a dirty track, or a worn sweep, an owner can usually handle that. A word of caution: sliding door panels are heavy, and lifting one out of the track alone can lead to a dropped panel or a back injury. Get a second set of hands or leave it to us.

Where DIY goes wrong is inside the frame. Replacing a balance assembly, re-glazing an insulated unit, or re-hanging a heavy slider out of square requires the right tools and a second person. Done wrong, a dropped sash or a misaligned slider costs more to fix than the original repair. Our technicians have up to 19 years of experience with these systems. If you’re not sure, call (888) 303-8980 and we’ll tell you what the part likely is and what it takes to swap it.

FAQs

A new wood side gate with black hardware

Get a Written Price for Your CGI Window or Door Repair

Whether you’re chasing a balance assembly on a bedroom double-hung or a fogged pane in the family room, we’ll identify the part, confirm the series, and give you a flat written price before any work begins. Every visit includes a documented photo record of what we found and what we did, and the 365-Day Done Right Promise stands behind the work. Call Rowan Construction Group Garden Grove at (888) 303-8980 to schedule your free estimate.

Written by the team at Rowan Construction Group Garden Grove, serving Garden Grove and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A walk-in shower with large-format tile and a built-in nicheA remodeled family room with new windows and a window seatA standing-seam metal roof over a covered porchA new concrete driveway with a paver borderA stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled hall bathroom with subway tile and a floating vanity

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Garden Grove

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Garden Grove team

A local vetted partner works across Garden Grove and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 303-8980
Local Service Coverage

Request a Free Estimate in Garden Grove

Tell us what you need - Rowan Construction Group Garden Grove responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch