







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Driveway & Pavers: The Garden Grove Owner’s Guide
If your CWS-marked driveway or paver surface is cracking, settling, or shedding joint sand, we install and repair CWS-compatible hardscape in Garden Grove, with paver driveway installation typically running $7,000 – $18,000 and concrete driveway installation $4,500 – $12,000. We’re an independent contractor, not affiliated with CWS, and we quote a flat written price before any work begins.
Most Garden Grove homeowners find out something is wrong the same way: a hairline crack in the driveway widens over one or two rainy seasons, a paver edge lifts where the car turns in, or the sand between pavers starts washing out toward the street every time it rains. Clay-heavy soil across much of central Garden Grove holds water in winter and shrinks in summer, which is exactly the cycle that opens joints and drops slab corners. By the time it’s visible from the sidewalk, the base layer underneath has usually been moving for a while.
Which CWS Models This Applies To

CWS refers to the hardscape material line, not a single product, so matching the right replacement starts with identifying what’s actually on the property. The two things that matter are the paver series and the surface finish, and both are usually traceable without guesswork.
- Find the label or pallet tag. CWS paver bundles ship with a printed tag showing the series name, color, and nominal dimensions. If the original install left a spare bundle in the garage or side yard, that tag is the fastest possible match.
- Measure, don’t eyeball. Pull three pavers from different areas and measure length, width, and thickness with a tape. Thickness matters most – most residential driveway pavers run 60mm to 80mm, and mixing thicknesses on a driveway causes rocking and joint failure within a season or two.
- Photograph the color in daylight. Paver color changes with sun exposure, so a swatch photo taken at noon under direct light is a far better match tool than one taken under a garage light.
- OEM versus compatible aftermarket. Original CWS matching stock gives you an exact color and dimension match. A compatible aftermarket paver in the same thickness and a close color family costs less and works fine for repairs out of direct sightlines, but will read slightly different in a front-yard patch.
If the series tag is gone, we can identify the profile on site and tell you which route – original match or compatible equivalent – actually makes sense for the size of the repair.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Driveway & Pavers Is Failing
- Joint sand washing out after rain. Water is moving through the joints instead of across the surface, which points to a failing base or missing edge restraint rather than the pavers themselves.
- Pavers rocking or sinking at the driveway apron. The apron takes the heaviest load and the most water runoff, so base compaction failures show up there first.
- Hairline cracks spreading across concrete sections. In Garden Grove’s clay soils, a crack that widens season to season usually means the subgrade is moving under the slab, not that the concrete mix was bad.
- Weeds sprouting from joints. Persistent growth between pavers signals sand loss and an open path for water – both fixable, but only if the base underneath is still sound.
- Sunken sections near downspouts or planters. Concentrated water discharge erodes base material quietly. If a section near a downspout has dropped more than about a quarter inch, the erosion is already underway.
Each of these is worth a look before it turns into a full replacement. A written assessment with photos tells you which ones are cosmetic and which ones are structural.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what CWS-compatible driveway and paver work runs in Garden Grove. These are installed prices, not material-only, and they include the base prep, edges, and cleanup.
- Paver driveway installation: $7,000 – $18,000
- Concrete driveway installation: $4,500 – $12,000
- Asphalt driveway paving: $3,500 – $9,000
- Driveway replacement: $5,000 – $14,000
- Paver patio installation: $3,500 – $11,000
- Driveway sealing: $250 – $700
The range is driven by square footage, base depth (clay soil often needs deeper excavation than a standard spec), paver series, and whether edge restraints and drainage have to be rebuilt. We write the price and scope down before work starts – no “call for a quote,” no moving target. Change orders only proceed once signed. Every install carries our 365-Day Done Right Promise and a written workmanship warranty, plus a documented photo record of what we found and what we did.
DIY or Call Us?
Some things are safe to handle yourself; others aren’t worth the risk. Here’s the honest split.
- Safe to check yourself: joint sand depth, cracks and gaps, loosened pavers, and obvious sinking near downspouts. Photograph what you find and note when it appeared.
- Don’t DIY: pulling up and rebedding pavers, excavating a base repair, or attempting a slab replacement. Removing pavers without a proper base rebuild typically fails again within a season, and it’s easy to damage the edge restraint while doing it.
If you’re not sure which category your issue falls into, call us at (888) 303-8980 and we’ll walk through it over the phone before anyone comes out.
FAQs

A properly installed paver driveway typically lasts 25 to 30 years; the pavers themselves often outlast the base underneath them. In Garden Grove, the clay soil and seasonal wet-dry cycle shorten the base’s lifespan compared to sandier ground. Call (888) 303-8980 for a free assessment of what condition your base is in.
Yes, in many cases it can. A localized section that’s rocking or has lost joint sand is usually a reset-and-rebase job, not a full replacement. If cracks or settling run across multiple sections, replacement is often the better value.
A typical Garden Grove driveway replacement takes three to six days, depending on square footage and base depth. Weather and permitting can shift that; we’ll confirm a schedule in writing before work starts.
We source through vetted hardscape suppliers and match the paver series and thickness to what’s on your property. Where original CWS stock is unavailable, we identify a compatible aftermarket equivalent and call out the difference in color or dimension up front.
Call (888) 303-8980 for a free estimate on your CWS driveway or paver project in Garden Grove. We deliver a written price before any work starts, backed by our 365-Day Done Right Promise.
Written by the team at Rowan Construction Group Garden Grove, serving Garden Grove and nearby areas.












