







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Bathroom Remodeling: The Garden Grove Owner’s Guide
We install ECO Window Systems-compatible bathroom remodeling in Garden Grove, and the typical installed price runs $9,000 – $28,000 for a full bath, with smaller projects landing between $5,000 and $12,000. Most Garden Grove owners discover the problem the same way: a fogged or leaking unit, a shower pan that flexes underfoot, or a vanity cabinet that swells at the base after a wet winter. Those three symptoms point to failed seals, a failed membrane, or moisture-wicking particleboard, and each one has a different fix and a different number attached to it.
We’re Rowan Construction Group Garden Grove, an independent service provider. We’re not affiliated with ECO Window Systems, but we work on and around their products regularly, and we price the work in writing before anyone picks up a tool.
Key Takeaways
- Full bathroom remodel in Garden Grove: $9,000 – $28,000 installed.
- Small bath remodel: $5,000 – $12,000. Walk-in shower: $4,500 – $12,000.
- Written flat price before work starts, and no change order gets signed until you’ve read it.
- 365-Day Done Right Promise on the work, with a documented photo record on every visit.
Which ECO Window Systems Models This Applies To

ECO Window Systems builds vinyl-framed window and door units and related bath enclosure products, and the model line matters because gasket profiles, weep system placement, and frame dimensions shift between series and vintages. Before we quote anything, we read the label. On ECO units it’s typically on the interior jamb or the head of the frame, and it lists the series, the glass package, and a manufacturing date code. If the label is gone, we measure rough opening width, height, and depth to the sixteenth of an inch and compare against the existing gasket profile.
The OEM-versus-aftermarket question for ECO Window Systems is straightforward. Gaskets, weatherstripping, and glazing seals have aftermarket equivalents that match well when the profile is right, and we use them when they save you money without compromising the seal. Glass units and frame components are a different story: a mismatched replacement IGU (insulated glass unit) in a high-humidity bath will fog again inside two years, and a frame that doesn’t match the original extrusion won’t accept the original trim. We name what we’re sourcing on the quote, brand and spec, so you’re not guessing. We also work with KraftMaid, Cambria, and Silestone on the cabinetry and surface side of these jobs.
One Garden Grove-specific gotcha: homes built in the 1950s and 1960s in the West Garden Grove and Garden Park tracts often have 30-inch rough openings where the ECO unit was originally configured for a different bath layout. That measurement has to be confirmed before we order, or the unit comes back and the schedule slips a week.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ECO Window Systems Bathroom Remodeling Is Failing
- Fogging between the panes. The seal on the insulated glass unit has failed and moisture has entered the air space. Once that happens, the window can’t be cleaned clear and the IGU needs replacing.
- Water staining at the sill or on the interior wall below the unit. The weep system is clogged or the sill seal has failed, and water is tracking inward instead of draining out. By the time you see the stain, the framing behind it has usually been wet for a season.
- A shower pan that flexes or clicks when you step on it. The pan wasn’t set in a mortar bed, or the subfloor has softened from a slow leak. Flexing pans crack along the drain flange, and that’s when the ceiling below starts showing a ring.
- Swollen or soft cabinet boxes at the toe kick and base. Particleboard vanity boxes wick moisture from the floor and fail from the bottom up. A soft toe kick means the cabinet is past repair and needs replacing, not refinishing.
- Grout lines that crack in the same place twice. Movement in the substrate, usually from a missing or failed membrane (the waterproof layer under the tile). Re-grouting a cracked line without fixing the membrane just buys you a few months.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here are the installed numbers we quote in Garden Grove, all-in for parts and labor:
- Full bathroom remodel: $9,000 – $28,000
- Small bathroom remodel: $5,000 – $12,000
- Walk-in shower installation: $4,500 – $12,000
- Tub-to-shower conversion: $3,500 – $10,000
- Shower replacement: $3,000 – $8,500
- Bathroom vanity installation: $800 – $3,000
The range moves with the substrate condition, the tile selection, and whether we’re moving plumbing. What’s not in the range is a surprise: we write a flat price with a written scope, and if we open a wall and find something the quote didn’t cover, nothing proceeds until a change order is signed. The work carries our 365-Day Done Right Promise, and you get a photo record of the before, the rough-in, and the finished product.
DIY or Call Us?
You can safely check a few things yourself: look for the unit label to identify your ECO Window Systems series, feel along the sill for softness or staining, press a towel into the shower pan to see if the flex is uniform or localized, and look at the ceiling below the bath for water rings. That’s information, and it’s useful.
Where DIY goes wrong is inside the wall. Removing a frame to check the flashing, re-setting a shower pan on a new mortar bed, and re-waterproofing a tile surround all fail at the same point: the part you can’t see. We’ve been called to more second attempts than first ones, and the repair cost on a failed re-do runs higher because now there are two layers to take out. Call (888) 303-8980 and we’ll give you a free estimate with a written price before anything gets touched. If you already have a quote from someone else, we’ll review it line by line at no charge.
FAQs

A properly installed insulated glass unit typically lasts 15 to 20 years before the seal fails, and in Garden Grove’s coastal-adjacent humidity the number can drop if the window faces west and takes full afternoon sun. Shower pans and tile membranes run 20 to 30 years when the waterproofing was done correctly.
Sometimes. A fogged IGU can be swapped without replacing the frame in most ECO Window Systems configurations, and that runs a fraction of a full replacement. A cracked or flexing shower pan cannot be repaired, only replaced, because the leak is under the pan, not in the surface.
An IGU swap is a few hours. A shower pan replacement runs two to four days because the pan has to be set and cured before tile goes back on. A full bathroom remodel runs two to four weeks depending on tile and plumbing scope. We put the working schedule in the written quote so you’re not guessing about your bathroom being out of commission.
We identify the series from the label or from frame and gasket measurements, then specify the replacement with the manufacturer’s part number where it’s available and a matched-profile alternative where it isn’t. Every part is named on the written quote before it’s ordered, and we photograph the old part next to the new one so you can see what actually came out.
Call (888) 303-8980 for a free estimate. We’ll identify your ECO Window Systems unit, put a written price in your hands, and tell you plainly what needs replacing and what doesn’t.
Written by the team at Rowan Construction Group Garden Grove, serving Garden Grove and nearby areas.












