







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling: The Garden Grove Owner’s Guide
KraftMaid-compatible kitchen remodeling in Garden Grove runs $14,000 to $45,000 installed for a full kitchen, with cabinet-only work starting at $4,000 and countertops at $2,000. Most owners discover a failing component the same way: a door that won’t sit flush after years of daily use, a drawer that grinds instead of gliding, a hinge that lets the frame sag into the next cabinet. In Garden Grove’s older housing stock, where kitchens often date to the 1960s and 1970s, these failures show up sooner because the cabinet boxes were never plumb to begin with and the hardware has been carrying that load. We install and repair KraftMaid cabinetry across Garden Grove and quote a written flat price before any tool comes out.
Which KraftMaid Models This Applies To

KraftMaid builds across several door styles and construction tiers, and the part you need depends on which one you own. The three lines Garden Grove owners most often call about are the Maple, Oak, and Cherry series in the company’s full-access and standard-access cabinet constructions. Before ordering anything, check the interior of a cabinet door or the back panel of a drawer box for the KraftMaid label: it carries the cabinet line and sometimes a finish code. If the label is gone, measure the door height, width, and hinge cup bore diameter (most are 35mm) and the drawer box depth.
The OEM-versus-aftermarket call matters here. KraftMaid’s own replacement hinges and slides are built to the cabinet’s original spec and preserve the fit. Quality aftermarket equivalents – Blum, Grass, and Hettich hardware in particular – often outlast the original part and cost less, but they require checking the mounting pattern and door thickness, because a European-style hinge with the wrong overlay will leave a visible gap. We quote both options in writing so you can see the price difference before deciding. We’re an independent service provider and not affiliated with KraftMaid; we source compatible parts through the same distribution channels the manufacturer uses.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Kitchen Remodeling Is Failing
- Doors that drift out of alignment. The hinge plate has loosened in the cabinet frame, usually because the original screws stripped the particleboard or the hinge itself has worn its pivot. Re-tightening works for a week, then fails again.
- Drawers that grind or stick halfway. The slide has lost its lubricant or the ball bearings have flattened. In coastal Southern California humidity swings, the steel in older slides corrodes faster than the cabinetry around it.
- Soft-close doors that slam. The damper in the hinge has failed. It’s a small part, but a slamming door over months will crack the frame joint, which turns a $30 fix into a cabinet rebuild.
- Cabinet box that won’t sit plumb against the wall. In Garden Grove homes built before 1980, the wall itself has often moved. The cabinet isn’t failing; the installation is. This is a leveling and shimming job, not a parts swap.
- Water staining at the toe kick or under the sink base. The cabinet bottom has absorbed moisture, usually from a slow supply-line leak. The cabinetry isn’t the problem here – the moisture source is – but the damaged box has to be assessed before any hardware replacement makes sense.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing for the work this page covers in Garden Grove:
| Work | Installed Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Cabinet installation (hardware, doors, boxes) | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Small kitchen remodel | $9,000 – $20,000 |
What drives the range: the number of cabinets and doors, whether the boxes stay or come out, countertop material (Cambria and Silestone quartz land in the middle of the countertop range; Kohler sinks and fixtures add to the fixture allowance), and whether the wall behind the cabinetry needs repair. We quote parts and labor as separate line items so you can see what the hardware costs versus the installation. Every job carries a written workmanship warranty and the 365-Day Done Right Promise: if it isn’t done right, we make it right.
DIY or Call Us?
You can safely identify the part yourself: read the label inside the cabinet door, measure the hinge bore, and check whether the door is warped or just misaligned by laying a straightedge against the face. What goes wrong for owners is the installation step. Replacing a hinge or slide on a mounted cabinet means the door has to be held in position while the new plate is set, and a cabinet box that’s already out of plumb will fight you the whole way. Soft-close hardware especially needs the hinge cup depth to match the bore exactly, or the door won’t close flat. If the box itself is water-damaged or the frame has cracked, that’s a structural repair, not a parts swap. Call (888) 303-8980 and we’ll tell you honestly which one you’re looking at – the written estimate is free, and we’ll review any competitor’s quote line by line at no charge.
FAQs

Most last 10 to 15 years with daily use, and soft-close hardware typically fails first because the damper mechanism has a shorter service life than the hinge itself. In Garden Grove’s coastal-adjacent climate, humidity swings accelerate corrosion on older steel slides, so the cabinet boxes often outlast the hardware by years. Call (888) 303-8980 for an exact quote on replacement – estimates are free.
Sometimes yes, and it’s worth checking before you commit to replacement. A loose hinge plate can be re-seated with slightly larger screws or a hinge repair plate if the cabinet frame isn’t stripped out; a slide can occasionally be cleaned and re-lubricated. When the metal itself has worn or the damper has failed, replacement is the durable fix.
A single door or drawer’s hardware can be swapped in well under an hour; a full kitchen’s worth of hinges and slides typically takes most of a day. The variable is alignment – a plumb, true cabinet box runs fast, and an out-of-square one takes the extra time to shim and set correctly.
We order through the same distribution channels KraftMaid uses and cross-reference the cabinet line and part spec before anything ships, which is why the label inside the door matters. When an OEM part is discontinued or backordered, we quote a quality aftermarket equivalent (Blum, Grass, Hettich) with the mounting compatibility confirmed in writing first.
Ready to stop fighting a door that won’t close? Call (888) 303-8980 for a free estimate on your KraftMaid kitchen work in Garden Grove – a written flat price before any work starts, a free second opinion on any estimate you already have, and a documented photo record of what we find and what we fix. Our technicians have up to 19 years of experience, and every crew member is background-checked and uniformed.
Written by the team at Rowan Construction Group Garden Grove, serving Garden Grove and nearby areas.












