A Rowan company - serving Garden Grove, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
Schluter · Garden Grove

Schluter Bathroom Remodeling in Garden Grove, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Garden Grove
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A new paver patio with a seat wall and fire pit
A single-story rear room addition with tall windows and a new patio
A new clay tile roof
New double-hung windows in a dining room
A new front yard fence with a matching gate
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Bathroom Remodeling: The Garden Grove Owner’s Guide

A Schluter bathroom remodeling project in Garden Grove typically runs $9,000 to $28,000 installed, and it is planned work rather than emergency work – so it gets scheduled, priced in writing, and built to a documented scope. The price covers the waterproofing system the Schluter name is known for: the bonded membrane, the shower tray, the drain assembly, and the trim profiles that let tile meet drywall and floor cleanly. Owners usually find out something is wrong the same way. A hairline crack appears in the grout line at the shower curb. A flexing tile gives underfoot. A ring of damp shows at the baseboard on the wall behind the shower, or the ceiling below the bathroom starts to show a stain in Garden Grove’s older single-story tracts.

Call (888) 303-8980

Key Takeaways

  • Installed Schluter bathroom remodeling in Garden Grove: $9,000 to $28,000, with a flat written price before any work starts.
  • Most “Schluter failures” are installation failures – wrong thin-set, skipped prefill at seams, or a moisture sandwich – not product defects.
  • Rowan Construction Group Garden Grove is an independent contractor and is not affiliated with Schluter Systems.
  • Our technicians have up to 19 years of experience with bonded waterproofing, and every visit includes a documented photo record.

Which Schluter Models This Applies To

A tile setter installing wall tile in a shower

Schluter’s bathroom line is wide, and the failure you’re chasing depends on which family of product is in the wall. The waterproof assemblies most common in Garden Grove bathrooms are Kerdi-Board (foam panels), KERDI membrane in rolled sheet form, Kerdi-Band for the seams and corners, Kerdi-Fix sealant, and the Kerdi-Shower and Schluter-Shower System trays with the Kerdi-Drain or linear drain. On the tile edge there is the Schluter-DITRA uncoupling membrane for floors, Schluter-RENO-TK and RENO-U transition profiles at doorways, and the Jolly, Quadec, and Schiene trim profiles at niches, backsplashes, and outside corners. Schluter also makes Kerdi-Line drains and Kerdi-SD shower seats that show up in larger showers.

To identify the right part, work from what’s already in the wall rather than from a photo online. Sheet KERDI membrane is printed along its edge with the Schluter name and a lot number, and the roll width (common sizes are 3’3″ and 5′ wide, in 16.5 ft, 33 ft, and 98.4 ft rolls) tells you which format you’re replacing. Kerdi-Board panels are 1/2″, 5/16″, or 2″ thick, and the thickness is stamped on the edge. Kerdi-Drain flanges come in 4″ and 5″ sizes and the grate is a separate SKU that must match the drain body; a 5″ grate won’t fit a 4″ body no matter how close it looks. A Schluter-RENO profile is selected by tile thickness and install height, not floor width. Measure, photograph the markings, and bring both to a supply counter.

On the OEM versus aftermarket question: Schluter does not license a second-source equivalent for KERDI sheet or Kerdi-Board, so “Schluter-compatible” aftermarket membrane is a different product with a different bonded fleece and different approval. A generic sheet membrane may be a reasonable product on its own, but it isn’t a Schluter one, and mixing a generic membrane with Schluter’s Schluter-SET thin-set and Schluter-band rips the warranty coherence out of the system. Where aftermarket is honestly fine is in the trim profiles and in the trowel-notched thin-sets recommended by the membrane maker. If the failure is in the waterproof layer, use the genuine part.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Bathroom Remodeling Is Failing

The symptom list below is what owners at Rowan Construction Group Garden Grove routinely report, and each one points to a specific cause worth naming before anyone quotes a repair.

  • Flexing or hollow-sounding tiles near the shower floor. This almost always traces to an insufficient thin-set coat or a missed prefill of the mortar bed before the membrane was laid, leaving the tile disconnected from the substrate. When you tap a hollow tile it sounds different from a solid one, so a knock test with a screwdriver handle is the fastest diagnostic you have.
  • A hairline crack at a curb, corner, or niche. Movement in the framed wall or improper Kerdi-Band corner handling is the culprit; the corner band must overlap at the inside corner and be sealed with Kerdi-Fix, and skipping the sealant is the single most common shortcut. Below-grade slabs in Garden Grove also shift slightly across the seasons, and a curb that wasn’t anchored to the slab properly will telegraph that movement into the tile.
  • Damp baseboard or a stain below the shower. This is water escaping the waterproof layer – through a fastener that pierced the membrane, an improperly installed drain flange gasket, or a Kerdi-Drain that was set with the wrong thin-set. The moisture wicks through the cement backer or the Kerdi-Board and reaches the stud wall or the ceiling below. Visible staining on the ceiling below a second-floor bathroom is the strongest sign the drain or the pan liner failed and should be inspected before anything else.
  • Grout discoloration that returns after cleaning. Grout that stays dark or moldy near the shower base usually means tile-set movement isn’t the issue – moisture is migrating under the tile because the waterproofing is compromised. Cleaning it off without opening the joint just resets a clock. The one exploratory step is to carefully probe the grout line at the shower floor with a plastic tool; if the joint is soft or the tile lifts, the sandwich is failing.
  • Tile popping or “tenting” along the wall. Tenting – where a whole tile row lifts away from the substrate – is a classic sign of a missing bond breaker or a membrane that was laid over a damp substrate. In Garden Grove, where the summer humidity at the coast pushes 60-70%, cure cycles on slab and cement are slower than inland, and a crew that rushed the thin-set will see the failure a year or two later. The fix is a membrane-heavy rebuild of that wall, not a cosmetic patch.

One Garden Grove reality worth naming: the older 1950s-1970s housing stock around the city often has a wood-subfloor bathroom with a pre-Schluter mud-set pan underneath, and when you retrofit a Schluter system over that, the old pan and liner have to come out or the new membrane will trap water between the layers. That demolition cost is the single biggest driver of the Garden Grove price range, and it’s not the part of the job you want a crew to skip.

Replacement Cost & What’s Included

A new paver pool deck

For a Garden Grove homeowner, the installed price for a Schluter-system bathroom remodel or rebuild runs $9,000 to $28,000. The low end is a straightforward shower rebuild with tile and a standard Kerdi pan and drain; the high end includes a full bath – shower, tub or tub-to-shower conversion, vanity, and countertop – plus the demolition of an old liner, subfloor repair, and finishing tile detail.

Item Installed Range
Full bathroom remodel with Schluter waterproofing $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Walk-in shower installation $4,500 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Shower replacement $3,000 – $8,500
Bathroom vanity installation $800 – $3,000

What drives the range: whether the old waterproof layer is bonded and has to come out, whether the subfloor is sound or needs topping, drain location and whether it’s a Kerdi-Drain or a linear drain conversion, wall stud condition behind the failed area, and the tile and trim profile you choose. The written scope names the membrane, the drain, and the thin-set by product; the parts are priced as line items so you can see exactly what a Kerdi-Band roll costs versus what the labor to install it costs. The written price holds to the agreed scope, and any change requires a signed change order before a tool comes out.

The work carries the 365-Day Done Right Promise: if the install isn’t right within a year, we make it right. Under Clause 1 of the Haven Standard, the price is written before anyone starts – and the free second opinion on any written estimate is available if you’re comparing our line items to another contractor’s.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

The Garden Grove Climate Factor

Garden Grove sits a few miles inland of the coast, so the marine layer pushes humidity into the city in the mornings and settles by afternoon. For a Schluter system that means the two thin-set cure windows that matter most – setting the membrane and setting the tile – are more sensitive to ambient moisture than they would be in Palm Springs. A substrate that reads dry to the touch at 8 a.m. can still hold moisture in the air, so a crew that skips a moisture reading before setting the membrane will trap water under it. That’s an installation discipline point, not a Schluter spec defect. We take a moisture reading on the substrate before every membrane set and put the reading in the photo record.

A Real Detail: The Drain Flange

The Kerdi-Drain is the single component where the Garden Grove failures we see most often concentrate, and it is also the part where aftermarket substitution is most tempting. The drain body, the bonding flange, and the grate are three separate SKUs, and the flange has to be set with a thin-set that the drain manufacturer rates for bonded waterproofing – not a bag of general-purpose thinset from a big-box endcap. The grate and the drain body are also sold separately, and a 4″ body with a 5″ grate is the mismatch that catches most DIY replacements. If the grate is broken or the seal is weeping, replacing just the grate is a 20-minute job; replacing the flange is a shower-floor tear-out. Get the body size and the grate size off the drain body before you order either.

DIY or Call Us?

Some of this you can check without a tool. A homeowner can tap tiles for hollow sounds, look for grout cracks and soft joints, check the ceiling below the shower for stains, and confirm the drain body size and grate dimensions before ordering a part. If the symptom is a cracked grate, a missing corner band that failed visibly, or a loose trim profile, a competent DIYer can replace the profile or grate without touching the waterproof layer.

Where DIY goes wrong: any repair that pierces the KERDI membrane or the Kerdi-Board returns a leak you will chase for years. Screws through a membrane, cutting back a Kerdi-Band seam, or re-tiling a curb without removing the failed membrane all break the waterproof layer. A shower rebuild is also a wet-area demolition job – a pan liner or a failed mud bed has to come out, the studs inspected, and the substrate re-set, and doing that wrong creates a much larger bill than doing it once. The floor and wall work is heavy and slow; that part is best left to a crew that does it every week. Call (888) 303-8980 to schedule a free estimate on a fix that goes to the substrate instead of over it.

We install Schluter waterproofing alongside KraftMaid and Cambria in the bath, and Silestone and Cambria on the vanity tops when you’re ready to look at the full room. Rowan Construction Group Garden Grove works as an independent contractor and is not affiliated with Schluter Systems or any other manufacturer named here.

FAQs

An open kitchen and dining area after a remodel

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new roof with clean valleys and new flashingA new multi-panel patio door opening a kitchen to the patioA new stained cedar privacy fenceA second-story addition that matches the existing rooflineA newly finished roof with a ridge vent and step flashingA new front entry door with glass sidelights

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Garden Grove

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Garden Grove team

A local vetted partner works across Garden Grove and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 303-8980
Local Service Coverage

Request a Free Estimate in Garden Grove

Tell us what you need - Rowan Construction Group Garden Grove responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch