A Rowan company - serving Garden Grove, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Schluter · Garden Grove

Schluter Kitchen Remodeling in Garden Grove, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Garden Grove
A remodeled kitchen with a waterfall island and wood cabinets
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A wood double vanity with two mirrors after a bathroom remodel
A finished backyard cottage with a small covered porch
A new roof with clean valleys and new flashing
A new multi-panel patio door opening a kitchen to the patio
A new stained cedar privacy fence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Kitchen Remodeling: The Garden Grove Owner’s Guide

Schluter kitchen remodeling in Garden Grove isn’t a repair – it’s the full kitchen scope built around Schluter’s underlayment and waterproofing system, and it typically runs $14,000 – $45,000 installed depending on layout, cabinet and countertop choices, and whether the subfloor gets repaired. Our technicians have up to 19 years of experience installing Schluter-compatible kitchens, and we quote the number in writing before anyone picks up a tool. Founded in 2007, Rowan Construction Group has delivered 4,000-plus projects, every one with a written price before work started and a documented record when the crew left.

Call (888) 303-8980

Owners usually discover a failed part in steps, not all at once. Thin-set or uncoupling membrane separates around a floor tile and the grout line opens. Schluter-KERDI in a shower or wet-wall shows a darker grout band or a loosened corner. Schluter-QUADEC or DITRA-HEAT loosens where trims meet a cabinet face. For older Garden Grove kitchens – the post-war stock built between the late 1940s and the 1960s – the failure usually surfaces years after the last remodel because the original slab or plywood subfloor moved and the membrane sheared. We are an independent service provider, not affiliated with Schluter.

Which Schluter Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Schluter is a systems manufacturer, not a single-product brand, and getting the right piece starts with identifying which system you have. The four you’ll meet in a Garden Grove kitchen:

  • Schluter-DITRA – the uncoupling membrane under floor tile. Sold in rolls and sheets at a fixed thickness (the standard 1/8 in / 3 mm, the XL at 5/16 in / 8 mm), identified by the stamped logo on the fleece back or the printed edge.
  • Schluter-KERDI – the waterproofing membrane for wet areas. Comes in 3.5 in and 5 in band roll widths and 39 in sheet widths; the band is priced per roll and the sheet per foot. The KERDI-BOARD panels come in 1/2 in, 5/8 in, and 3/4 in thicknesses.
  • Schluter-QUADEC / JOLLY / RONDEC – the tile edge profiles. PVC, aluminum, or stainless, in lengths of 8 ft 2 in and heights sized to your tile thickness (typically 3/8 in or 1/2 in). The profile must match the tile’s actual milled thickness, not the nominal 12×24 label.
  • Schluter-DITRA-HEAT – the electric floor-heating system. Cables come in fixed wattages (the DITRA-HEAT-E HK is rated for 120V and comes in lengths you match to square footage in a fixed 3.5 W per sq ft output). You cannot add cable; you can only change thermostat or section.

The OEM-vs-aftermarket call for Schluter is easy: use genuine Schluter DITRA, KERDI, and QUADEC. The warranty follows the membrane, and the US warranty is conditioned on the installation using Schluter’s own products and approved thin-sets. Aftermarket membrane “equivalents” at half the price are the fastest way to lose coverage. Where aftermarket makes sense is hardware – cabinet hinges, drawer slides, appliance trim kits – and none of that is Schluter.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Kitchen Remodeling Is Failing

  • Hollow taps over the subfloor. Hear a dull thud when you walk across the tile? The thin-set has debonded from the DITRA fleece or the DITRA has lifted from the subfloor. Left alone, the tile loses its bearing and cracks.
  • Grout lines opening in straight runs. Movement, not age, is the usual cause. Schluter-DITRA is designed to absorb lateral movement up to 1/8 in; beyond that, the grout unzips in long, straight channels.
  • Caulk lifting at the shower or backsplash base. That’s KERDI or caulk losing adhesion at the transitions. A repeat failure every 18 to 24 months points to moisture behind the tile, not to bad caulk.
  • QUADEC trim rocking or a lost stainless leg. The profile fastens under the tile edge and its leg is thin; impact damage or a mis-sized profile will pop it loose, exposing the raw tile edge.
  • DITRA-HEAT cold spots. If only part of the floor warms, the heating cable or sensor has a fault. Test with a multimeter against the manufacturer’s ohm reading before assuming the thermostat is bad.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A new front yard fence with a matching gate

Schluter-system kitchen remodeling in Garden Grove, priced by scope:

Full kitchen remodel with Schluter-DITRA and KERDI $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation (KERDI over drywall) $800 – $2,500
Kitchen island installation $3,000 – $10,000

What drives the range: subfloor condition (plywood replacement, slab flatness), tile selection (porcelain vs. slab), whether wet-wall KERDI runs full height, and whether DITRA-HEAT is included. Every quote is flat, in writing, with a written scope and written warranty before work begins. Under Clause 1 of the Haven Standard, no work proceeds on a change until the change order is signed – that discipline has kept our projects within a few percent of the agreed cost. If you’re bringing an estimate from another contractor for plan review, our Free Second Opinion line-by-line review is at no charge.

DIY or Call Us?

You can safely identify the system without opening anything: read the membrane name on a spare edge in the garage, measure the thickness with calipers, and photograph the ground under your tile. Where DIY goes wrong is in the actual install. Tile breakage on failed DITRA is high because the debonded membrane releases the tile unevenly, and reusing the old DITRA is not an option once the fleece is loaded with old thin-set. Schluter-DITRA-HEAT is the other hard stop – mains voltage under a wet floor is not a DIY repair. The tile has to come up, the membrane has to come out, and the new one bonds and cures. That’s a trained-technician job, and we’d tell any Garden Grove homeowner the same thing.

If you’ve ruled out a DIY fix, call (888) 303-8980 for a free estimate – the price is written before work starts, and the work is covered by our 365-Day Done Right Promise.

FAQs

A new paver pool deck

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new bay window with a cushioned seatA new wood side gate with black hardwareA new concrete driveway with a paver borderA remodeled hall bathroom with subway tile and a floating vanityA remodeled primary bathroom with a soaking tub and walk-in showerA single-story rear room addition with tall windows and a new patio

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Garden Grove

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Garden Grove team

A local vetted partner works across Garden Grove and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 303-8980
Local Service Coverage

Request a Free Estimate in Garden Grove

Tell us what you need - Rowan Construction Group Garden Grove responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch