







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Driveway & Pavers: The Garden Grove Owner’s Guide
We install Sterling-compatible driveway and paver systems in Garden Grove, with typical installed paver driveway projects running $7,000 – $18,000 and concrete driveways $4,500 – $12,000. We’re an independent contractor, not affiliated with Sterling, and we quote a written flat price before any work starts. Most homeowners reach us after a winter of pooling water, a widening crack at the apron, or pavers that have started to heave and settle unevenly near the garage approach.
Which Sterling Models This Applies To

Sterling paver and driveway systems show up in Garden Grove on tract homes built mostly between the late 1990s and the mid-2010s, and the part you need depends on which system you have. The first thing to check is the base type: a true interlocking paver system (individual units with sand joints) versus a poured concrete slab with a decorative pattern stamped in. They fail differently and they’re repaired differently, so identify yours before you price anything.
On pavers, the compatibility gotcha is thickness. Sterling’s standard residential pavers run 60mm, while the heavier 80mm units are spec’d for driveways that take full vehicle loads. Replacing a 60mm paver with an 80mm unit (or the reverse) creates a height mismatch at the joints that water finds immediately. Measure a loose paver at the edge with calipers before ordering, and check the joint pattern – a running bond and a herringbone use different edge restraints.
For concrete slabs, the relevant specs are slab thickness (typically 4 inches for a driveway, 5 – 6 inches where a heavier vehicle parks), control-joint spacing, and whether the original pour included a moisture barrier and compacted base. On OEM vs. aftermarket: Sterling’s own replacement pavers are the safest match for color and dimension, but quality aftermarket equivalents from Belgard and Techo-Bloc meet the same load ratings and often match a faded color better than a fresh OEM batch would. We source from 50-plus vetted brands, so we’ll tell you which route gives the honest number.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sterling Driveway & Pavers Is Failing
The symptoms below are the ones we see most on Sterling systems in Garden Grove, and each points to a different root cause. Diagnosing the cause matters more than patching the surface, because a paver that heaved once will heave again if the base wasn’t the problem.
- Ponding water after rain. Water sitting in a low spot usually means the base layer settled or the slope toward the street was never set right. Standing water accelerates joint sand loss and undermines the pavers beneath it.
- Pavers rocking or heaving. A paver that moves underfoot has lost its bedding sand or the base wasn’t compacted to depth. In Garden Grove’s clay-heavy soil, seasonal moisture swings push and pull the base until individual units lift.
- Widening cracks at the apron or joints. Cracks that open wider each season signal base failure or root intrusion below the slab. Sealing over a moving crack hides it for one season and fails the next.
- Joint sand washing out. Sand disappearing from joints after rain means water is channeling through rather than draining off. Left alone, the pavers lose interlock and start to shift.
- Efflorescence (white haze) that keeps returning. A chalky film that comes back after cleaning points to moisture trapped in the base, not a surface stain. It’s the base telling you it isn’t draining.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what driveway and paver work runs in Garden Grove, installed, with the flat written price you get before we start. The range depends on square footage, base condition, paver thickness and pattern, and whether old material has to be hauled off.
| Project | Installed Range (Garden Grove) |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
What drives the range: square footage, base repair versus full replacement, paver thickness (60mm vs. 80mm), pattern complexity, and haul-away. The written quote is a flat price with a written scope and a written warranty – parts and labor broken out so you can see where the money goes. Under Clause 1, the price is written before anyone starts, and no change proceeds without a signed change order. The work is covered by our 365-Day Done Right Promise: if it isn’t done right, we make it right.
DIY or Call Us?
Some of this is safe to check yourself, and some of it isn’t worth the risk. What you can do: measure a loose paver’s thickness, photograph the cracking pattern, note where water pools after rain, and confirm whether your system is pavers or a stamped slab. That information makes the estimate more accurate, and we’ll review any written estimate you bring line by line at no charge.
Where DIY goes wrong: re-bedding a paver without fixing the base beneath it just delays the same failure a season, and cutting or lifting a section of slab near a gas or utility line is genuinely dangerous. A paver system is only as good as the compacted base under it, and that’s the part you can’t see. Bring us the measurements and we’ll tell you honestly whether a repair or a replacement is the right call. Call (888) 303-8980 for a free estimate.
FAQs

A properly installed paver driveway lasts 25 – 50 years; the pavers themselves outlast the base by decades. The base and joint sand are what fail first, usually within 10 – 15 years if drainage wasn’t handled well. Garden Grove’s clay soil and seasonal wet-dry cycles are hard on bases, so joint sand replenishment every few years extends the life substantially. Call (888) 303-8980 for an exact quote on your driveway – estimates are free.
Yes, often. Localized heaving, washed-out joints, or a few cracked units can be repaired by lifting the affected section, re-compacting the base, and re-setting the pavers. Full replacement makes sense when the base has failed across the whole driveway or the slab has cracked through. We’ll tell you which one your driveway needs after we see it. Call (888) 303-8980 for a free estimate.
A paver repair on a small section takes one to two days; a full paver driveway replacement typically runs three to five days depending on square footage and base work. Concrete needs cure time before you drive on it, usually about a week. We give you the schedule in writing with the quote. Call (888) 303-8980 to schedule your free estimate.
We match by paver thickness, dimension, joint pattern, and edge restraint, then confirm the color against your existing units before ordering. We source through 50-plus vetted brands including Belgard and Techo-Bloc, so we can find an honest match even when the original Sterling run is discontinued. We also service other brands like KraftMaid, Cambria, and Silestone on the interior side of the house. Call (888) 303-8980 for a free estimate.
Whether your driveway needs a few pavers reset or a full replacement, the first step is a written price and a clear scope. Call Rowan Construction Group Garden Grove at (888) 303-8980 to schedule your free estimate and get a flat written quote before any work begins.
Written by the team at Rowan Construction Group Garden Grove, serving Garden Grove and nearby areas.












