







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Bathroom Remodeling in Garden Grove: The Owner’s Guide
Unilock bathroom remodeling in Garden Grove typically runs $9,000 to $28,000 installed, with a smaller bath landing between $5,000 and $12,000. The number depends on what’s behind the wall – the waterproofing membrane, the substrate under the tile, and whether the existing drain and supply lines line up with the new layout. We write that price down before anyone starts. No work begins without a signed scope and a flat written number.
Most Garden Grove homeowners discover the problem the same way. Water pools at the base of the shower wall and never quite dries. A tile sounds hollow when you tap it. Grout at the floor line turns dark within a season and comes back after cleaning. The bathroom is 20 or 30 years old in a house built during Garden Grove’s postwar build-out, and the membrane under the tile has been quietly failing for years. By the time it shows, the substrate is usually soft and the repair is bigger than the tile that cracked. We measure it, photograph it, and put the real scope and the real number in front of you.
Which Unilock Products This Covers
Unilock is a name most people know from hardscape – pavers, retaining walls, driveway and patio systems. For interior bathroom tile, the material a Garden Grove bathroom actually gets specified with is usually produced by a porcelain or ceramic tile manufacturer, not a paver line. So the first job on any Unilock-referenced bathroom call is confirming what you actually have. Before we quote anything, we identify the product from three places: the label on the original tile carton (if you kept it), a field measurement of tile face dimensions in inches and millimeters, and a moisture and substrate check on the wall or floor it sits on. Unilock paves outdoor surfaces; interior tile and shower systems come from separate manufacturers whose product lines are sized to different standards. That distinction matters because ordering the wrong part means a return, a delay, and a bathroom sitting half-finished for two weeks. We confirm the spec before a single box ships.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Bathroom Surface Is Failing
Tile and shower systems in Garden Grove fail on a predictable schedule. Southern California’s dry summers and humid coastal air create a moisture cycle that works on grout and mastic joints at the floor line, and the damage usually starts there. Here is what to check:
- Hollow-sounding tile. Tap lightly across the floor and wall. A hollow ring means the tile has lost bond with the thinset beneath it, usually because the substrate flexed or moisture got behind the edge. That tile is one heavy footstep from cracking.
- Dark or crumbling grout at the base and corners. Grout that stays dark days after cleaning has failed as a seal. Water is getting past it and working on the backing board behind the tile. This is the most common early warning we see in Garden Grove bathrooms.
- Soft drywall or bubbling paint on the wall opposite the shower. By the time paint bubbles on the far wall, moisture has crossed the stud cavity. The shower-side waterproofing is compromised, and the repair now involves opening a wall.
- Loose or “walking” floor tile. Floor tile that shifts underfoot has a failed thinset or a failed membrane beneath it. Left alone, the movement cracks grout lines and lets water into the subfloor.
- Persistent musty smell that returns after cleaning. A smell that comes back means an active moisture source behind the finish, not surface mildew. A moisture meter and a visual check behind the affected area tells you how far it spread.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here is what a bathroom remodel costs in Garden Grove, quoted as a flat written price:
| Scope | Installed price range |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
What moves the number: the condition of the substrate beneath the tile, whether the waterproofing membrane has to be rebuilt from the studs, and the tile and fixture selections. Fixtures from lines like Kohler and Toto, or cabinetry from KraftMaid and Cambria countertops, sit at the top of the range; builder-grade selections sit lower. Labor and materials are shown as separate line items, and the written warranty comes with the quote. Nothing gets added mid-project without a signed change order.
DIY or Call Us?
Some of this you can check yourself. You can tap for hollow tile, run a finger along the grout at the floor line, press on floor tile to feel for movement, and look for water staining on the ceiling below the bathroom if the bath sits over a garage or first floor. That inspection tells you whether you have a cosmetic issue or a failing system.
What we don’t recommend is pulling the shower apart yourself. Waterproofing a shower is a layered system – substrate, membrane, thin-set, tile – and one skipped step means a leak you won’t see for months, by which time the framing is wet. Shower pans and drain assemblies have to line up to a fraction of an inch or they fail at the seam. It looks simple on video and it fails quietly in real bathrooms. If a tap test turns up a hollow tile or the grout won’t stay sealed, call (888) 303-8980 and we’ll tell you what we find.
FAQs

Fifteen to twenty-five years for a properly waterproofed tile bathroom, and the waterproofing layer determines whether you get the top or bottom of that range. Our technicians have up to 19 years of experience, and the calls that come in early are almost always the ones where the membrane step was cut short. Call (888) 303-8980 for a written price on your bathroom.
Sometimes. A single cracked tile with intact waterproofing behind it can be repaired. A shower where the grout and substrate are compromised usually needs the membrane rebuilt, which in practice means a replacement. We report what the moisture meter and a visual inspection show, then quote the repair and the replacement prices side by side so you can decide. Estimates are free.
A standard bathroom remodel in Garden Grove runs two to four weeks depending on scope and material lead times. A shower replacement or tub-to-shower conversion typically lands on the shorter end. The schedule is written into your scope along with the price, and any change requires your signed completion before we proceed.
We source from over fifty vetted manufacturers, including tile and fixture lines that match your existing bathroom’s dimensions rather than a generic replacement. We confirm the product spec, order it, and include the material line items in your written quote. We don’t stock parts on a truck – the material is ordered to your job.
Whether you have a failing shower, a floor of hollow tile, or a bathroom that’s simply reached the end of its run, we’ll put a flat written price in front of you before anyone picks up a tool – backed by the 365-Day Done Right Promise, a photo record of every visit, and a live person answering (888) 303-8980 for a free estimate.
Written by the team at Rowan Construction Group Garden Grove, serving Garden Grove and nearby areas.












