







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Fence Installation: The Garden Grove Owner’s Guide
Unilock fence installation in Garden Grove typically runs $3,500 – $9,000 installed, with the exact number depending on linear footage, wall height, cap and pier detail, and whether the existing footing can be reused. We can usually schedule a free estimate within a few days, and we put a written flat price in your hands before anyone starts work.
The call usually comes after a Garden Grove owner notices a section that has started to lean after a Santa Ana wind event, or a panel that has separated at a post and won’t sit plumb no matter how many times it’s nudged back. Others find it more quietly: a crack that opens across a column cap after a dry summer, or a footing that has lifted a half-inch and left a gap you can see daylight through. Unilock’s modular wall and fence systems are engineered products with specific block profiles, cap dimensions, and footing specifications, which means the fix isn’t always a fresh panel. Often it’s resetting a pier, re-engineering a footing, or rebuilding a run with correct base compaction. Knowing which you’re dealing with is the first job.
Which Unilock Models This Applies To

Unilock makes several distinct lines that show up in Garden Grove residential fencing and garden-wall work, and they don’t interchange. The most common we see are the Brussel Block and Concord Wall retaining-block profiles, plus their freestanding wall block lines used for privacy walls and fence-footing modules. Each has its own face width, depth, and setback built into the mould; a Concord block cannot cap a Brussel column, and a cap meant for a 12-inch wall won’t seat flush on a 10-inch one.
To identify yours, look for the mould stamp on the bottom face of a block that’s already exposed, or measure across the top face of a cap and the exposed face height of the block courses. That combination narrows the line in most cases. It matters because when a section needs rebuilding, we’re matching the existing block so the new run reads as one structure, not two.
On the OEM-versus-aftermarket question: Unilock blocks are proprietary, and there is no true aftermarket stick for their moulded profiles. What exists is “compatible” block from other manufacturers that gets close on face dimensions but differs in colour and texture, and once the sun has worked on a wall for a few years that difference shows. Our position on a partial repair is to source the actual Unilock profile when it’s available; on a full rebuild, the run is uniform so the brand becomes a choice rather than a constraint.
One note for clarity: we are an independent contractor and not affiliated with Unilock. We also handle KraftMaid, Cambria, and Silestone cabinetry and stone work on other projects, but on this page we’re talking fences and walls.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Fence Installation Is Failing
These are the five symptoms we find most often across Garden Grove fences, and each one traces to a specific cause:
- Leaning section or post. Almost always footing failure, not block failure. In Garden Grove’s clay-heavy soils, water pools against the base of the pier during winter rains and softens it, and the pier rotates under load. Rebuild the footing and the lean stops.
- Gaps between blocks or a cracked cap. A cap that cracks across its span in the late summer tells us the wall below has settled unevenly or the cap wasn’t bedded on adhesive with proper coverage. Cap adhesive failure shows up as a hollow sound when you tap it.
- Moss, algae, or dark staining. Garden Grove’s coastal marine layer keeps surfaces damp in the mornings, and a wall in shade stays wet long enough for algae to take hold. Cosmetic, but a sign the base drainage is trapping moisture.
- Panels pulling away from posts. On fence sections mounted to Unilock piers, the connector hardware loosens as the pier moves. If the pier is stable and the hardware is loose, re-anchor; if the pier is moving, the footing is the job.
- Visible efflorescence in patches. The white chalky bloom that appears after a wet winter is salt migrating out of the block. It’s normal in new work and less so in a five-year-old wall; persistent bloom usually means water is getting behind the block from the top.
If a section has come down entirely or a pier has visibly shifted away from the wall, that’s a stability problem, not a maintenance one. Don’t stand or lean on a section that moves under hand pressure; call us or another contractor to look at it before you spend money on parts.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Fence and wall work on Unilock profiles in Garden Grove comes in at $3,500 – $9,000 installed for a typical residential run. Here’s how the number breaks down:
| Scope | Typical installed range |
|---|---|
| Single pier reset with new footing | $600 – $1,800 |
| Partial run rebuild (10 – 20 linear ft) | $1,500 – $4,000 |
| Full fence run, standard height, no pier work | $3,500 – $9,000 |
| Full run with new piers and caps | $6,000 – $12,000 |
| Cap replacement only | $300 – $900 |
What drives the range: linear footage, block profile and whether it’s in production, footing depth and whether we’re excavating into hard pan, and site access. What’s included in every quote: tear-out and disposal, base prep and compaction, new footing at code depth, block and adhesive, cap and cap adhesive, and our written warranty on the work. The 365-Day Done Right Promise is printed on the quote. If it isn’t done right, we make it right.
We give a flat written price before any work starts and don’t open up a scope change without a signed change order. That has kept our projects within a few percent of the agreed number across 4,000-plus jobs.
DIY or Call Us?
What you can safely do yourself: measure the run, check whether a leaning section is the pier or just hardware, note where the grade drains, and photograph the block stamps so we can confirm the profile by phone. Cleaning algae with a stiff brush and a mild detergent is fine.
What you shouldn’t attempt: resetting a pier, rebuilding a footing, or re-bedding a cap on a wall taller than about three feet. A modular wall is a retaining structure as much as a fence; when the footing fails, the block above it is load-bearing and 40-pound blocks become a hazard if a course shifts while you’re working on it. Footing depth also needs to meet our local code, and a wall that was never permitted shows up later at inspection. Leave the structural work to a licensed contractor, and call us at (888) 303-8980 to schedule a free estimate. We’ll tell you plainly what failed, what to fix, and what it costs.
FAQs

Ten to fifteen years is realistic once the footing is right; block itself lasts far longer, and it’s the footing and base drainage that decide the lifespan. Our dry summers and wet winters are hard on poorly drained piers, and we see failures here around year eight to ten on original footings.
Usually yes. If the failure is one pier, one cap, or one section, we can reset or rebuild just that portion and match the existing block. A whole run gets replaced only when multiple piers have moved or the profile is no longer available.
A single pier reset is a one-day job. A partial rebuild is two to three days, and a full fence run with new piers is three to five days including cure time on the footings. We confirm the timeline in the written scope before we start.
Through authorized distributors and masonry supply yards that carry the Unilock line. We confirm the mould profile by photo or on-site measurement, then order the matching block and cap with a written lead time in the quote.
Every visit includes a documented photo record of what we found and what we did, included as standard. Crews are background-checked and uniformed, and a live person answers your call any time. Call (888) 303-8980 for a free estimate and a written price you can hold onto.
Written by the team at Rowan Construction Group Garden Grove, serving Garden Grove and nearby areas.












