







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat It Costs to Reface Kitchen Cabinets in Garden Grove, CA
Refacing kitchen cabinets in Garden Grove runs $4,000-$13,000 for a standard 10-by-10 kitchen, but many homes here land higher. The reason: most Garden Grove cabinets came out of 1950s-1970s tract construction with box depths and heights that don’t match modern factory door sizes, so custom-cut veneer and filler strips add 15-25% to a generic quote. For a written line-item price on your actual cabinets, call Rowan Construction Group Garden Grove at (888) 303-8980. Estimates are free, and the number is in writing before anyone starts.

Why Garden Grove Refacing Quotes Run Higher Than the National Range
A homeowner near Garden Grove Boulevard was quoted $5,800 to reface 18 cabinet doors. Then the measure happened: the original 1962 uppers were 11 inches deep, not the 12 inches factory doors assume. A full custom veneer order added $1,100 and two weeks. That gap never showed up in the first estimate, because nobody measured the boxes before quoting.
Garden Grove’s housing stock is mostly mid-century single-story stucco tract homes on 6,000-7,000 sq ft lots. That build era left four cost triggers that generic refacing estimates miss:
- Non-standard box dimensions. Uppers built at 11 inches deep or 30 inches tall instead of today’s 12 and 34 mean custom veneer sheets and filler strips cut to fit.
- Laminate bonded to particleboard. Forty- to sixty-year-old laminate has to be sanded or chemically stripped before new veneer will adhere. Skip this step and the new surface lifts within a season.
- Misaligned hinge bore patterns. Old bores rarely line up with modern concealed hinges, so new drilling is standard, not optional.
- Drawer-front count. A 1960s Garden Grove kitchen typically has more drawers than the national refacing estimate assumes. Each drawer front is priced separately, and it adds up fast.
Standard vs. Custom vs. Full Replacement: A Dollar Comparison
Before you call anyone, triage which refacing column your cabinets fall into. Here’s how the three paths compare in Garden Grove dollars:
| Scope | Price range |
|---|---|
| Standard-box refacing (Wellborn or KraftMaid door and drawer fronts, new hardware) | $4,000-$7,500 |
| Custom-dimension refacing (non-standard depth/height, laminate strip, new hinge bores) | $5,500-$9,500 |
| Custom refacing with new countertop | $7,500-$13,000 |
| Full cabinet replacement, same footprint | $9,000-$16,000+ |
Cabinet installation in Garden Grove runs $4,000-$13,000, and a full kitchen remodel including cabinets, counters and backsplash lands at $14,000-$45,000. Refacing fits a tight budget; replacement fits boxes that are failing structurally. If you’re weighing the wider project, our Kitchen Remodeling in Garden Grove page covers the full scope, and the main Kitchen Remodeling service page breaks down each trade.

What Happens When We Measure Your Cabinets?
A refacing price that holds up starts with an in-home measure, not a photo and a phone estimate. When we visit a Garden Grove kitchen, here’s what gets written down:
- Box depth and height on every upper and lower, recorded in inches.
- Drawer-front count, hinge type and bore spacing.
- The existing surface: laminate over particleboard, bare plywood or painted wood.
- Condition of shelves, fixed or adjustable, and any visible sag.
Under Clause 1 of The Haven Standard, the price is written before anyone starts. That means the custom veneer and filler-strip cost appears in the quote, not on demo day. If your 1962 uppers need 11-inch custom sheets, you’ll see that line item before you sign anything.
We take a documented photo record on that visit too, as a standard deliverable rather than an upgrade. It shows shelf condition, hinge wear and any delamination already starting, so you know what the refacing will and won’t fix.
The Shelf and Structural Check Refacing Alone Skips
Refacing changes doors and drawer fronts, not the box behind them. In a fifty-year-old Garden Grove cabinet, the shelf is where wear hides. Plywood and particleboard shelves sag under a cast-iron skillet or a stack of stoneware, and a sagging shelf holds the new door out of alignment. That’s why our measure visit includes a quick structural read: we press on shelves, check for bowing and note how far the boxes have drifted. If a shelf or an entire box needs attention, we tell you before the doors get ordered, and the written scope reflects it.
Will Cheap Veneer Survive Garden Grove’s Coastal Air?
Not always. Garden Grove sits in a semi-arid inland pocket, but marine air still reaches it, and salt plus seasonal damp accelerates delamination on low-grade veneer. The result is a refaced cabinet that looks fine for a year and starts lifting on the edges after two. We specify water-resistant adhesives and veneer substrates rated for coastal-influenced climates, so the surface you’re paying for stays bonded. It’s a spec-level detail you’ll rarely see in a refacing quote, and it’s the one that decides how long the job lasts.
Why Rowan Construction Group Garden Grove
Rowan Construction Group Garden Grove quotes every job with a flat written price and scope, and no change proceeds without a signed change order. Our technicians have up to 19 years of experience, they’re background-checked and uniformed, and a live person answers calls 24/7. Refacing falls under our kitchen trade, and we source doors and fronts through vetted brands like Wellborn and KraftMaid so the quote carries honest numbers. The 365-Day Done Right Promise backs the work: if it’s not done right, we make it right.
FAQs
Refacing kitchen cabinets in Garden Grove typically costs $4,000-$13,000, with most standard 10-by-10 kitchens landing in the middle. Custom-dimension work on mid-century boxes runs toward the top of that range. Call (888) 303-8980 for an exact quote on your layout; the estimate is free.
Refacing is usually cheaper: custom refacing runs $5,500-$9,500 and full replacement starts around $9,000. Replacement makes better sense when the boxes themselves are failing. A measure visit settles it in person, so call (888) 303-8980 to schedule one.
Yes. Non-standard box depths and heights mean custom-cut veneer and filler strips, and we price those from the measure, not after demo. Expect 15-25% above a standard refacing quote, all written up front. Call (888) 303-8980 to get that number for your cabinets.
Most Garden Grove refacing jobs take three to five days once materials arrive. Custom veneer for an odd box size can add one to two weeks to the order. Call (888) 303-8980 and we’ll put a timeline in writing with the price.
Ready to stop guessing at a refacing number? Rowan Construction Group Garden Grove delivers a flat written price before any work starts, backed by the 365-Day Done Right Promise. Call (888) 303-8980 for a free estimate, or bring a competitor’s quote and we’ll review it line by line at no charge.
Written by the team at Rowan Construction Group Garden Grove, serving Garden Grove, CA.
What Our Customers Say
"Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."
- Iona F."Driveway replaced properly with a base that will actually last. They explained why the cheaper quote was cheaper."
- Reggie O."Solid work, decent crew, and the site was left tidy every evening."
- Pearl A.












